Industrial metal LED luminaires designed to be mounted in high positions. We deliver them at 60 °, 90 ° and 120 ° angles and at 100W, 150W and 200W. The luminaire body, including the heat sink and the power driver, is made of aluminum cast with a black anodized finish. (The anodised surface never collapses and is color-stable). Driver Meanwell provides the correct power supply to the LED module located on the radiator from the underside of the luminaire. Used CREE chips are characterized by very high specific power (> 150 lm / W) at CRI Ra> 80. The combination of the Meanwell driver and the CREE LED Chips provides this product with the consumer with the ultimate in quality and lighting comfort that can be achieved at this time. The luminaire is designed for single-point hanging on a cable or chain, or for mounting on a steel caliper. Voltage connection is possible via a watertight cable clutch mounted on the power cable (not supplied) because the luminaire's own body is not intended for disassembly. The luminaire is provided with a plastic structured cover with an optical system from the bottom, which directs the light stream to a predefined angle, thereby reducing the glare coefficient.
The luminaires are suitable for large industrial indoor and outdoor areas, high ceilings, workshops, warehouses, sports facilities, all objects without the risk of explosion of gases, dust and combustible vapors. Luminaires resist deformation, dust and moisture penetration.
Voyager lamps provide the ultimate lighting comfort and have the best features that can be achieved today at a very affordable price. For these luminaires, we provide 3 years warranty under the operating conditions.
Exclusion of liability
Changes to data are subject to prior notice. NBB Bohemia s.r.o. accepts no responsibility for damages caused by inaccurate interpretation of the content on this site.
Notice
Under the scope of Act 185/2001 Coll. as amended, this product is included in waste group 5 (light sources and luminaires). In view of the harmful effects of mercury on the environment and on human health, the creators of group 5 waste (consumers) are obliged to dispose of used light sources for recycling. Do not throw this product into mixed waste after use. Take it to the nearest store, collection yard, or other designated location for free recycling. You can also dispose of the used products for recycling in our sales outlets or in collection points of collective recycling systems or municipal collection yards. Ecological recycling of waste electrical and electronic equipment is ensured through the RETELA collective system (www.retela.cz).
Notice (LVD)
LED light sources ranks among electrotechnical products powered by mains 230-240V. For safety reasons, it is recommended that the assembly, connection or disassembly be carried out by a person with an appropriate electrotechnical qualification. When installing or disassembling, it is advisable to disconnect the power supply otherwise there may be a risk of electric shock. Only use the product in the luminaires designed for this type of light source. The manufacturer can not be held responsible for damages resulting from inappropriate connection, connection to an unsuitable distribution system, or damages resulting from mechanical damage to the light source. Observe the operating values on the product. Do not expose the product to inappropriate weathering or high temperatures unless it is expressly stated that the product is intended to be operated under these conditions. When installing, wiring or disassembling, follow the generally accepted safety precautions.
Notice
Single LED chip failure, luminous flux deviation +/- 10% as well as chromaticity deviation +/- 150K are in compliance with applicable standards and are not a reason for complaint.