EFECTIVE system NARVA COLOURLUX T5 EQ
EQ means EFFICIENCY OUTPUT. These fluorescent tubes offer extremely high luminous efficacy up to 104lm/W (at 35° C). They are designed for operation with electronic ballasts and are as much as 20% more efficient than Tri-band COLORLUX PLUS T8 lamps. Due to their size can also be used in a very compact and flat luminaires. Fluorescent tubes LT-T5 series COLOURLUX plus have very good colour rendering (Ra> 82). Therefore, they are very suitable for lighting in the workplace but they can also be find their application in industry, workshops, shops, public services, offices and in private areas. These tubes are available in different white tones.
Exclusion of liability
Changes to data are subject to prior notice. NBB Bohemia s.r.o. accepts no responsibility for damages caused by inaccurate interpretation of the content on this site.
Warning
If broken in a closed room, we recommend ventilation to reduce the mercury vapor concentration. Use protective equipment while working. Immediately remove the shards so that they do not get injured. After removing the shards, use the technical means for decontamination of mercury. For this purpose we supply decontamination kits, which you can order by phone or in our internet shop. The decontamination kit should not be missed especially in plants where there is a danger of breaking light sources containing mercury, such as stores, warehouses, but can also be used in households. In case of nausea, give first aid and call a physician.
Notice
Fluorescent tubes of all types require a corresponding type of ballast to operate. A suitable ballast type can be found in the detail of the item (additional products). The quality and type of the ballast greatly affect the life of the fluorescent lamp. NBB Bohemia is not responsible for shortening lamp life when the fluorescent lamp is connected to a ballast type that NBB Bohemia s.r.o. because in such a case we can not guarantee the suitability of using the ballast to the supplied fluorescent tube. When directly connected to the mains voltage without using the ballast, the fluorescent lamp will be destroyed. Fluorescent tubes are not suitable for connection to motion sensors or for connection to frequent switching devices. Frequent switching causes shortening of lamp life. Frequent switching is considered to switch the fluorescent lamp to an interval of less than 20 minutes.