Login/Username

LED pásek LED Strip 24V 240LED/m SMD3528 6000K IP20 19,2W/m

Product evaluation Favourite Comparison Send to email Whole product group The catalog

LED Strip 24V 240LED/m SMD3528 6000K IP20 19,2W/m
Order number: 903003050
Brand: NBB
Type / Description: LED pásek
Unit EAN13 code: 8595209916846
Guarantee: 24 months

Product is In stock

Watchdog
Insertion notification

Your price with VAT 399,86 Kč
m

You are a corporate buyer? We have for you better prices! Sign up or Log in.


Exclusion of liability

Changes to data are subject to prior notice. NBB Bohemia s.r.o. accepts no responsibility for damages caused by inaccurate interpretation of the content on this site.

Notice

Under the scope of Act 185/2001 Coll. as amended, this product is included in waste group 5 (light sources and luminaires). In view of the harmful effects of mercury on the environment and on human health, the creators of group 5 waste (consumers) are obliged to dispose of used light sources for recycling. Do not throw this product into mixed waste after use. Take it to the nearest store, collection yard, or other designated location for free recycling. You can also dispose of the used products for recycling in our sales outlets or in collection points of collective recycling systems or municipal collection yards. Ecological recycling of waste electrical and electronic equipment is ensured through the RETELA collective system (www.retela.cz).

Warning
LED light sources must be operated so that they do not overheat. Overheating the light source may cause it to destroy or ignite. It is forbidden to connect the LED tapes wound onto the spool to voltage, there is a risk of fire! LED lamps without an integrated ballast may be operated on an electronic driver or other power supply that meets the supply conditions. It is necessary to observe the principles of power supply in the sense that some LED light sources are supplied with stabilized voltage and some stabilized current. Using an inappropriate power supply can damage the light source LED. NBB Bohemia is not responsible for defects in light sources caused by inappropriate power supply. In the case of LED strips with a higher power than 10W / m, it is not permissible to couple several strips in series. In this case, the LED strip at the connection point will become overheated and will be destroyed.


For powerful LED strips at higher power than 10W / m, adequate cooling is required. When designing cooling, the ambient temperatures must be taken into account. Powerful high-performance tapes with silicone or resin castings are not designed for continuous operation, as their cooling is problematic even when installed in aluminum bars that improve cooling. The company that manufactures powerful LED tapes has to design a cooling and operating time to make the tapes cool down. In the event that the tapes are destroyed by overheating, we will not be responsible for the damage caused.
Notice

Single LED chip failure, luminous flux deviation +/- 10% as well as chromaticity deviation +/- 150K are in compliance with applicable standards and are not a reason for complaint.

More photos available


Prices

without VAT VAT rate with VAT
Your price 1 m 330,46 Kč 21% 399,86 Kč

Invertory

Stock code Stock Number
001 Centrála Benešov < 10 m
006 Brno < 10 m

General information

Model/Description Led pásek ohebný
Finish Vnitřní
Brand/Manufacturer NBB
Material PCB
Nominal service life (h) 25000 h
Degree of protection (IP) IP20
Colour bílá
Model Pásek
Dimmable Ano
Lamp voltage (V) 12 V
Self-adhesive Ano
Nominal voltage (V) 24 V
Lowest bending radius 10 mm
Lamp power per meter 19,2 W
Lenght of particular segments 500 mm
With connection set Ne
With end piece Ne
Dimmable by conventional dimmers Ne
Název položky LED pásek 24V 240LED/m SMD3528 6000K IP20 19.2W/m

Working conditions

Dimmable range %
Maximum permitted storage temperature 80 °C
Burning position
Application Dekorativní osvětlování
Suitable for frequent switching Ano
Ambient temperature 60 °C
Fire resistance "F"
Driver included

Physical characteristics

Type of chip SMD 3528
Dimensions (mm) 14x5000 mm
Packing method 5 - 1
Weight gross 177 g
Width 14 mm
Height 2 mm
Weight netto 167 g
Length 5000 mm
Number of LEDs 1200
Number of lamps per meter 240

Additional information

Note IP20

Safety information

Insulation class Třída III.
Safety instructions www.nbb.cz

Energetic characteristics

Lamp Power factor (PF)
Rated efficiency after 100h 99.99 %
Lamp efficacy 100 lm/W

Electrical characteristics

Nominal wattage 96 W
Rated power (W) 96,0 W
Compatible ballast CV 24 V
Operating voltage (V) 24 V
Type of Voltage DC
Direct connection to the mains Ne
Voltage type DC
Nominal current (A) 4 A

Mounting methods/application

Mounting method Montáž na kovový chladič/nutné zajistit adekvátní chlazení!

EuP Parameters

Average Lifetime B50 (h) 25000 h
Luminescence Life maintenance factor 70,0 %
Factor of functional reliability (LSF) after nom. life 50,0 %
Equivalent to fluo.lamp (W) W
Time to 60 % luminous flux 0,3 s
Number of maximal switching cycles >50000
The rate of premature failures 0,1 %
Colour difference 90,0 %
The light source is designed for outdoor and industrial use
Rated service life 25000 h
Energy consumption (AGGR) 96 kWh/1000h
Equivalent linear fluorescent W
Equivalent compact fluorescent lamps W
Equivalent mercury lamp W
Turn-on time <0,3 s
GLS replacement W
Φ 90° lm

Lighting characteristics

Color rendering 2B
Light Colour chladná denní
Wavelength range nm
Dominant wavelength 444 nm
Luminous flux 9600 lm
Colour temperature 6000 K
Radiation angle 120 °
Colour of light 860
Colour temperature 6000 - 6500 K
Chromaticity coordinates x 0,3209
Chromaticity coordinates y 0,3322

Environmental characteristics

Mercury content 0,00 mg


Download

Technical sheet

Technical sheet LED Strip 24V 240LED/m SMD3528 6000K IP20 19,2W/m

Download

Product Data sheet

1.93 MB