LED pásek LED Strip 12V 60LED/m SMD3528 6000K IP20 4,8W/m

Product evaluation

Favourite

Comparison

Send to email Whole product group

The catalog

LED Strip 12V 60LED/m SMD3528 6000K IP20 4,8W/m

Order number:	903003029
Brand:	NBB
Type / Description:	LED pásek
Unit EAN13 code:	8595209922298
Guarantee:	24 months

Product is In stock

Watchdog
Insertion notification

Your price with VAT 117,84 Kč

You are a corporate buyer? We have for you better prices! Sign up or Log in.

Exclusion of liability

Changes to data are subject to prior notice. NBB Bohemia s.r.o. accepts no responsibility for damages caused by inaccurate interpretation of the content on this site.

Notice

Under the scope of Act 185/2001 Coll. as amended, this product is included in waste group 5 (light sources and luminaires). In view of the harmful effects of mercury on the environment and on human health, the creators of group 5 waste (consumers) are obliged to dispose of used light sources for recycling. Do not throw this product into mixed waste after use. Take it to the nearest store, collection yard, or other designated location for free recycling. You can also dispose of the used products for recycling in our sales outlets or in collection points of collective recycling systems or municipal collection yards. Ecological recycling of waste electrical and electronic equipment is ensured through the RETELA collective system (www.retela.cz).

Warning

LED light sources must be operated so that they do not overheat. Overheating the light source may cause it to destroy or ignite. It is forbidden to connect the LED tapes wound onto the spool to voltage, there is a risk of fire! LED lamps without an integrated ballast may be operated on an electronic driver or other power supply that meets the supply conditions. It is necessary to observe the principles of power supply in the sense that some LED light sources are supplied with stabilized voltage and some stabilized current. Using an inappropriate power supply can damage the light source LED. NBB Bohemia is not responsible for defects in light sources caused by inappropriate power supply. In the case of LED strips with a higher power than 10W / m, it is not permissible to couple several strips in series. In this case, the LED strip at the connection point will become overheated and will be destroyed.

For powerful LED strips at higher power than 10W / m, adequate cooling is required. When designing cooling, the ambient temperatures must be taken into account. Powerful high-performance tapes with silicone or resin castings are not designed for continuous operation, as their cooling is problematic even when installed in aluminum bars that improve cooling. The company that manufactures powerful LED tapes has to design a cooling and operating time to make the tapes cool down. In the event that the tapes are destroyed by overheating, we will not be responsible for the damage caused.

Notice

Single LED chip failure, luminous flux deviation +/- 10% as well as chromaticity deviation +/- 150K are in compliance with applicable standards and are not a reason for complaint.

More photos available

Prices

		without VAT	VAT rate	with VAT
Your price	1 m	97,39 Kč	21%	117,84 Kč

Invertory

Stock code	Stock	Number
001	Centrála Benešov	< 1000 m
006	Brno	< 100 m

General information

Model/Description	Led pásek ohebný
Finish	Vnitřní
Brand/Manufacturer	NBB
Material	PCB
Nominal service life (h)	25000 h
Degree of protection (IP)	IP20
Colour	bílá
Model	Pásek
Dimmable	Ano
Lamp voltage (V)	12 V
Self-adhesive	Ano
Nominal voltage (V)	12 V
Lowest bending radius	10 mm
Lamp power per meter	4,8 W
Lenght of particular segments	50 mm
With connection set	Ne
With end piece	Ne
Dimmable by conventional dimmers	Ne
Název položky	LED pásek 12V 60LED/m SMD3528 6000K IP20 4.8W/m

Working conditions

Dimmable range	%
Maximum permitted storage temperature	80 °C
Burning position
Application	Dekorativní osvětlování
Suitable for frequent switching	Ano
Ambient temperature	°C
Fire resistance "F"
Driver included
Maximum ambient operating temperature - Ta	40 °C

Physical characteristics

Type of chip	SMD 3528
Dimensions (mm)	8x5000 mm
Packing method	5 - 1
Weight gross	75 g
Width	8 mm
Height	2 mm
Weight netto	68 g
Length	5000 mm
Number of LEDs	300
Number of lamps per meter	60

Lighting characteristics

Color rendering
Light Colour	chladná denní
Wavelength range	nm
Dominant wavelength	444 nm
Luminous flux	2400 lm
Colour temperature	6000 K
Radiation angle	120 °
Colour rendering index CRI	70 Ra
Colour of light	760
Colour temperature	6000 - 6500 K
Chromaticity coordinates x	0,3209
Chromaticity coordinates y	0,3322

Environmental characteristics

Mercury content	0,00 mg

Electrical characteristics

Nominal wattage	24 W
Rated power (W)	24,0 W
Compatible ballast	CV 12V
Operating voltage (V)	11 - 12 V
Type of Voltage	DC
Direct connection to the mains	Ne
Voltage type	DC
Nominal current (A)	2 A

Mounting methods/application

Mounting method	Montáž na kovový chladič/nutné zajistit adekvátní chlazení!

EuP Parameters

Average Lifetime B50 (h)	25000 h
Luminescence Life maintenance factor	70,0 %
Factor of functional reliability (LSF) after nom. life	50,0 %
Equivalent to fluo.lamp (W)	W
Time to 60 % luminous flux	30 s
Number of maximal switching cycles	>50000
The rate of premature failures	0,1 %
Colour difference	80,0 %
The light source is designed for outdoor and industrial use
Rated service life	25000 h
Energy consumption (AGGR)	26,2 kWh/1000h
Equivalent linear fluorescent	W
Equivalent compact fluorescent lamps	W
Equivalent mercury lamp	W
Turn-on time	<0,3 s
GLS replacement	W
Φ 90°	lm

Safety information

Insulation class	Třída III.
Safety instructions	www.nbb.cz

Energetic characteristics

Lamp Power factor (PF)
Rated efficiency after 100h	99.99 %
Lamp efficacy	100 lm/W

Download

Technical sheet

Technical sheet LED Strip 12V 60LED/m SMD3528 6000K IP20 4,8W/m

Download

Product Data sheet

1.54 MB